|
 Why
not Do It Youself?
Purchase any Stock Rhinestone Design or Custom
Rhinestone Design and apply it to your own garment
or craft.
To purchase a design, click on "Designs"
and browse through our selections. If you would
like to purchase a Do It Yourself Custom Design,
click on our "Custom
Designs" page for more information.
Application Instructions:
| • |
Carefully remove the white backing
|
| • |
Position and press the design into the fabric.
(The clear adhesive film will hold the design
in place) |
| • |
Always iron on a hard flat surface |
| • |
Set iron on medium or wool setting. (NO
STEAM OR MOISTURE) Approximately 350 degrees
is best for this process. |
| • |
Place a piece of lightweight cloth over
top of the design. |
| • |
Use medium amount of pressure on the iron.
DO NOT MOVE the iron back and forth, keep
in on the pressing cloth for 30 seconds. (Heavier
fabrics require more time, lighter fabrics
require less time.) |
| • |
Allow design to cool for approx. 2 minutes.
Using care gently remove the clear plastic
film away from garment. |
| • |
Again, place lightweight cloth over top
of the design and press of an additional 30
seconds. |
Tips:
You may reposition design before ironing. If
you move a crystal out of postion, use a tweezer
and carefully replace the crystal in it's original
position.
ONCE IRONED ON, the design is PERMANENT
Care Instructions:
Turn garment inside out and wash on gentle cycle,
air dry or dry clean.
|
Your Shopping Cart
Leave
it to us. The Full Service option gives you the
ability to have your custom rhinestone design
or stock design applied to the garment of your
choice. We have a full range of apparel and accessories
to choose from. Please visit our 
